Kit Home Index › A-frame
The Barn Yard A-Frame Cabin Kit
A-frameCan be orderedThe Barn Yard ↗
The A-Frame Cabin Kit, an a-frame kit from The Barn Yard, is published at $37,995 to $43,087 for the kit and covers 216 square feet.
The Barn Yard does not publish a wind rating, a snow load or anything about fire for this model, so 62 percent of the fields we score are blank.
None of that tells you whether it works on your land. Wind, snow, seismic and flood performance are site specific engineering, so the only useful answer comes from running this kit against your address.
Completeness
38 percent of the fields we score are backed by something The Barn Yard published. Why completeness is never part of the grade.
The thing nobody else will tell you
This kit cannot be scored on its own. Nothing on this page tells you whether it works on your land.
Wind, snow, seismic and flood performance come from your address, not from this kit. Put in an address and the gates run against the real requirement at that point.
Free, and it stays free.
Against our own kit
The owner of this site makes a kit home too. Rather than hide that at the bottom of a policy page, here it is at the top of every kit page, on published data only, with the same eight questions in the same order every time. Where a maker publishes nothing, this says so instead of guessing.
| The Barn Yard A-Frame Cabin Kit | The Octolithic ours | |
|---|---|---|
| Can you order one today? | Yes | No |
| Published price | Not published | Not publishednot yet. see our target |
| Size | 216 sq ft | 400 sq ft |
| Design wind speed | Not published | Not publishednot yet. see our target |
| Snow load | Not published | Not publishednot yet. see our target |
| Wall R value | Not published | R-19.3 for the finished exterior wall. One panel, one thickness, no options: a 5 inch core, 7 and three quarter inches finished, with 1 inch of structural mortar on each face. Tested on the … |
| Foundation | Insulated pressure-treated wood floor system (4x4 foundation beams) shown; site foundation not specified | Two options, and they are not an upgrade path, they are a question about the lot. On a slab at grade, or raised on its own eight sided garage story with a structural elevated floor. In a FEM… |
| Where it ships | Ships nationwide; primary regions New England, Mid-Atlantic, Southeast, Mountain West | Florida only. The engineering stamp is state specific. |
Both publish 2 of these 5 measurable figures. We publish no design wind speed and no snow load, which are the two figures that decide whether any kit can be permitted on a given lot, so on the numbers that matter most we cannot yet prove anything. A blank is a maker who has not published a figure, and it is not a fail. How this conflict is handled.
The Octolithic Kit Grade
| Buyability weight 25 | 100 takes orders today, publishes a price, nationwide delivery |
|---|---|
| Cost honesty weight 25 | 70 publishes a price, publishes a range rather than one misleading number, itemises 2 of 14 build stages, states plainly what the price excludes |
| Materials and carbon tier weight 15 | 100 timber frame or mass timber, once biogenic storage is counted, a lower embodied carbon class |
Rubric v1.0, August 2026. Site fit is not in this grade, because it depends on your land rather than on the kit. Every weight, and what we refuse to grade.
What the maker publishes
Everything here came off The Barn Yard's own pages, cited at the bottom. A blank is a blank: we never fill one in.
| Build type | A-frame |
|---|---|
| Structural system | Post-and-beam frame, mortise-and-tenon joinery with oak pegs; engineer-stamped plans included |
| Finished size | 216 sq ft |
| Bedrooms | Not published |
| Bathrooms | Not published |
| Wall R value | Not published |
| Roof R value | Not published |
| Foundation types | Insulated pressure-treated wood floor system (4x4 foundation beams) shown; site foundation not specified |
| Lead time | Not published |
| Delivers to | Ships nationwide; primary regions New England, Mid-Atlantic, Southeast, Mountain West |
| Country | United States |
| Build difficulty | A small crew, no crane Panels or timbers are lifted into place. Most people hire help, but it is not specialist work. This maker says an owner can put it up themselves. Read from the maker and the method. |
What the maker says it resists
Design capability as published. Not a certification, not a rating of your house, and not proof against anything.
| Engineered wind speed | Not published |
|---|---|
| Roof snow capability | Not published |
| Seismic | Not published |
| Fire | Not published |
Price
$37,995 to $43,087
This is the number the maker publishes. What it covers is in the line below, and it is almost never the finished cost of a house.
| What that number covers | Total kit price (materials only, DIY assembly); a fully-built/installed option is also offered at additional cost. Not per-sqft. |
|---|
What else we found
Established New England barn/shed manufacturer (The Barn Yard) selling a dedicated A-frame cabin line with engineer-stamped plans; no wind/snow mph or psf number published on this page. No BBB or defunct-company flags found in research.
Questions to send this maker
Generated from what they left blank. Every one of these is a thing they could answer today and have chosen not to publish. Copy them into an email. If they answer, tell us and we will update this page with the citation.
- What design wind speed is this model engineered to, in miles per hour, and at what Risk Category and Exposure Category?
- What ground snow load can the roof carry, in pounds per square foot, and is that the ground load or the roof load?
- What is the roof assembly's fire classification, and are the vents ember resistant?
- What Seismic Design Category will you engineer this model to, and is that included or a paid upgrade?
- What is the wall R value, and is that nominal insulation or a tested whole assembly value including thermal bridging?
- What is the roof R value, and is it nominal or whole assembly?
- What is the lead time in weeks from deposit to delivery, right now?
Across the whole Index, the average kit publishes about a quarter of what a buyer needs. This maker is at 38 percent.
Questions people ask about the The Barn Yard A-Frame Cabin Kit
Answered from what The Barn Yard publishes, including the answers that are "they do not say".
How much does the The Barn Yard A-Frame Cabin Kit cost?
The Barn Yard publishes $37,995 to $43,087. Total kit price (materials only, DIY assembly); a fully-built/installed option is also offered at additional cost. Not per-sqft.
What wind speed is the The Barn Yard A-Frame Cabin Kit engineered to?
The Barn Yard does not publish a design wind speed for this model. Only about one kit maker in ten publishes one. Note that "hurricane rated" has no legal definition in the United States, so a page using that phrase without a number has told you nothing.
What snow load can the The Barn Yard A-Frame Cabin Kit roof take?
The Barn Yard does not publish a snow load for this model. Around one maker in twenty does.
Can you actually buy the The Barn Yard A-Frame Cabin Kit?
Yes. The Barn Yard takes orders for this model today.
What foundation does the The Barn Yard A-Frame Cabin Kit need?
The Barn Yard publishes: Insulated pressure-treated wood floor system (4x4 foundation beams) shown; site foundation not specified
How well does the The Barn Yard A-Frame Cabin Kit stand up to a hurricane or a wildfire?
The honest answer is what it resists, and under what conditions. No kit home is proof against either, and any page telling you otherwise is selling. "Hurricane rated" has no legal definition in the United States, no house can be tornado rated, and whole building certifications like LEED, Passive House and HERS all require a built, sited, inspected home and cannot be attached to a model from a spec sheet. What a maker can honestly tell you is what the design resists and under what conditions. For this model, they publish nothing at all.
Will the The Barn Yard A-Frame Cabin Kit work on my land?
Nothing on any spec sheet can answer that, including this one. Wind, snow, seismic, flood and soil requirements come from your address, not from the kit. The Octolithic runs every kit in the Index against the published hazard data for your point and shows you what survives and why the rest did not. It is free.
Compare
Nothing here is ranked by what anyone pays us, because no kit maker has ever paid for placement on this site.
Other kits from The Barn Yard
Other a-frame kits in the Index
How it compares
It documents more than the average a-frame kit, 38 percent against 31, and more than 9 of the other 14 we hold. Against the 11 a-frame kits with a comparable published price, it sits above 3 of them, and the middle of that group is $45,000.
Computed across all 515 kit homes in the Index, 15 of them a-frame. Recomputed on every build.
Sources
| Where these values came from | https://www.barnyard.com/structures/post-and-beam-cabin-kits/a-frame-cabin-kit |
|---|---|
| Maker's site | https://www.barnyard.com |
| Last checked | 09 October 2026 |
Values are what the maker published on the date above. Makers change pages without notice. If you find something out of date, use the contact form and we will recheck it and re-cite it. Members can dispute any figure on the page, and the dispute and its resolution are both published.